Opening/Ending Display Setting; Inputting The Opening Message - Honda NC750X Manual

2 Opening/ending display setting:

NC750X
You can set the STD or SP opening/ending
display.
Press the SEL button to select "STD" or "SP".
a
Press the SET button. The opening/ending
b
display is set.
When STD is set, the display returns to
u
ordinary display.
When SP is set, the display moves to the
u

inputting the opening message.

3 Inputting the opening message:
Opening message can input 6 letters for
each 3 lines.
Press the SEL button until the desired letter
a
is displayed.
You can input the alphabetical letters,
u
numbers and symbols.
Press and hold the SEL button to
u
advance the letter fast.
The line number which is inputting the
u
letters is displayed in the mileage area.
Line number
Press the SET button. The letter is set, and
b
the next letter will start flashing.
Follow the procedure step 1 and 2 until
the end of line 3 letter is set.
Then the display moves to the inputting
the ending message.
(P.46)
Continued
45