Problem Solving - Philips SHC8680/61 Instructions For Use Manual

SHC8680new.qxd 04-05-2005
L
R
L R
NiMH
Problem
Headphone fails
to charge
10:24 Pagina 11
24 You may adjust the balance between left and right channels of the
headphone according to your personal preference.
25 For certain TV broadcast where Nicam Language selection is available,
you may choose your preferred language by playing:
– Stereo
– only the left channel
– only the right channel
26 When battery is running low, the POWER STATUS light will flash for
approximately 1 minute, reminding you to recharge the receiver unit.
At the same time, the receiver unit will be muted automatically to avoid
poor sound quality.

Problem solving

If a fault occurs, first check the points listed below. If you are unable to
remedy a problem by following these hints, contact the helpline
(see 'Need help?') or consult your dealer.
Never try to open the set yourself as this will void the guarantee.
First, check all cables to ensure that they are connected correctly.
Possible Cause
No battery installed
Wrong battery orientation
No power supply
Charging pins of the docking
station are not in contact with the make sure the CHARGING
metal plates of the receiver unit
Wrong receiver unit orientation
when placed onto the charging
dock
ENGLISH 11
Solution
Follow step 1 to 4 of
'Installing/replacing the batteries'
Reposition the batteries according to
the engraved polarity symbol.
Make sure the docking station is
connected to the local mains power
supply through an adapter and follow
steps 5 to 7.
Lock the receiver unit in place, and
INDICATION light is on.
Reposition the receiver unit with
correct orientation.