Kenmore 790.4670 Series Use & Care Manual page 29

Setting Oven Controls
Setting Broil
The pad controls the Broil feature. When broiling, heat radiates downward from the oven broiler for even coverage.
Broil
The Broil feature temperature may be set between 400°F and 550°F. This appliance includes a Searing Grill for searing
meats (Figure 6). The broil pan and broil pan insert used together allow dripping grease to drain and be kept away from the
high heat of the oven broiler. DO NOT use the broil pan without the insert (See Figure 5). DO NOT cover the broil pan
insert with foil. The exposed grease could catch fire.
Should an oven fire occur, leave the oven door closed and turn off the oven. If the fire continues, throw
baking soda on the fire or use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive and water
can cause a grease fire to spread and cause personal injury.
INSTRUCTIONS
To set the oven to broil at 500°F
1. Place the broiler pan insert on the broiler pan. Then place the food
on the broiler pan insert. DO NOT use the broiler pan without the
insert. DO NOT cover the broiler insert with foil. The exposed
grease could ignite.
2. Arrange the interior oven rack and place the broiler pan on the rack.
Be sure to center the broiler pan directly under the broiler element.
Make sure the oven door is in the broil stop position (See
Figure 4).
3. Press . "BROIL" will flash and "550" will appear (Figure 1).
Broil
4. Press
5 0 0
5. If a lower broil temperature is desired (minimum broil temperature
setting is 400°F), press the desired temperature before continuing to
step 6.
6. Press . The oven will begin to broil. "BROIL" and "500°" will
START
appear in the display (Figure 2).
7. Broil on one side until food is browned; turn and cook on the second
side. Season and serve. Note: Always pull the rack out to the stop
position before turning or removing food.
8. To cancel broiling press
Broiling Times and Searing Grill
Use the following table for approximate broiling times. Increase or decrease broiling times, or
move the broiling pan to a different rack position to suit for doneness. If the food you are
broiling is not listed in the table, follow the instructions provided in your cookbook and watch
the item closely. Use the Searing Grill for meats and steaks if desired. Before placing the
meat, be sure to heat the Searing Grill using Broil for 10 minutes. Cook times should be
reduced 1-2 minutes per side when cooking with the Searing Grill. Place Searing Grill on top
of Broiler Pan and insert for meats and steaks (See Figure 6).
Electric Range Broiling Table Recommendations
Food Rack
Item Position
Steak 1" thick
Pork Chops 3/4" thick
Chicken - Bone In
Chicken - Boneless
Fish
Shrimp
Hamburger 1" thick
.
(Figure 3).
STOP
Temp
Setting
2nd 550° F
2nd 550° F
2nd 550° F
3rd 450° F
2nd 450° F
2nd 500° F
3rd 550° F
2nd 550° F
3rd 550° F
5
Cook Time
1st side 2nd side
6:00 4:00
7:00 5:00
8:00 6:00
20:00 10:00
8:00 6:00
13:00 n/a
5:00 n/a
9:00 7:00
10:00 8:00
29
PRESS
TIMED DELAY
TIMED DELAY
DOOR LOCKED
DOOR LOCKED
TIMED DELAY
DOOR LOCKED
Broil
TIMED DELAY
0 0
DOOR LOCKED
START
Broil Stop Position
STOP
Doneness
Searing
Grill
Rare
Medium
Well
Well
Well
Well
Broil Pan
Well
& insert
Medium
Well
DISPLAY
TIMER CONV BAKE BROIL
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
CLEAN ROAST WARM PROBE
Figure 1
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 2
TIMER CONV BAKE BROIL
CLEAN ROAST WARM PROBE
Figure 3
Figure 4
Figure 5
Figure 6