Kenmore 790.4670 Series Use & Care Manual page 18

Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL and FLEX CLEAN
Broil
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Flex
2. Press to switch between Fahrenheit or Celsius display
Clean
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press to accept the change or press
START
change.
Flex
pads control the Fahrenheit or Celsius temperature display modes. The oven
Clean
to reject the
STOP
18
PRESS
Broil
Broil
for 7seconds
Flex
Clean
or
START STOP
DISPLAY
TIMED DELAY TIMER CONV BAKE BROIL
TIMED DELAY TIMER CONV BAKE BROIL
DOOR LOCKED CLEAN ROAST WARM PROBE
DOOR LOCKED CLEAN ROAST WARM PROBE
Figure 1
TIMED DELAY TIMER CONV BAKE BROIL
DOOR LOCKED CLEAN ROAST WARM PROBE
Figure 2
TIMED DELAY TIMER CONV BAKE BROIL
DOOR LOCKED CLEAN ROAST WARM PROBE
Figure 3