Programming The Unit - Krups ARUBA Manual

KR_CAFETIERE_ARUBA_NC00016960_NAFTA_Mise en page 1 08/03/11 17:35 Page12
English

PROGRAMMING THE UNIT

1 ) P R O G B U T T O N :
Use the PROG button (s) to access the 2 AUTO-START (q) functions of
brewing at preset time. The LCD will display a different function each time
PROG (s) is pressed. The blinking display of previous setting or 9:99 at
first use and the icon show you that the unit is in a programming mode.
A u t o - O n s e t t i n g # 1 :
Press PROG (s) once Fig.13, P1 displays and the AUTO-START
program #1 is indicated with a red light (r1).
Press the H and MIN buttons (o) to set a time for the machine to start
brewing automatically. You can press and hold the buttons to move
quickly through the hours or minutes.
Press PROG (s) when done. You will then be invited to set the second
program. You can skip this second step by pressing PROG (s) once
again.
A u t o - O n s e t t i n g # 2 :
Press PROG (s) twice Fig.14, P2 appears on the screen and the
AUTO-START program #2 is indicated with a red light (r2). This second
preset start time can be used for days with others wake times (on
weekends for example).
Press AUTO START button to activate the programmation Fig.15.
After programming the automatic start time as described above, be sure
to prepare the machine for a brew cycle with water in the tank, coffee in
the brew basket, lid closed and coffee tank securely in place.
Press the AUTOSTART button (q) to choose preset number 1 or
number 2. You can check the preset times by pressing PROG (s).
Once the programming is done, the LCD displays pictograms with the
current time.
The machine will brew automatically at the set time. The program will
need to be activated when needed again just by pressing on
AUTOSTART (q).
The setting of Autostart functions 1 & 2 can be adjusted
only during stand by mode (neither during brewing or
keep warm).
12