Moving Director Unit With Power Lift; Guiding Director Onto Rails Require One Person At Rear - Dell EMC Connectrix EC-1700 Series Installation And Setup Manual

Moving Director unit with power lift

Figure 35
To safely guide the director onto the rails, position one person at the
rear of the cabinet.
Figure 36

Guiding director onto rails require one person at rear

Fully install director unit(s) into cabinet until flush against the front
rails. Make sure none of the Velcro straps get caught between the
bracket and the rack. Once director(s) have been installed, attach all
Installing Directors into the EC-1700 Cabinet
Installing B Series directors
59