Viega 4296.2XL Instructions For Use Manual page 15

Pressgun Press Booster
Move the open hinged adapter jaw to the press ring.
Insert the ball heads of the hinged adapter jaw into the contact
points of the press ring.
NOTICE! Make sure the ball heads sit correctly in the contact
points of the press ring.
Push the handle forward.
ð The hinged adapter jaw closes.
Align the Press Booster so that safe footing is ensured during
pressing.
Carry out the first pressing with the press machine.
INFO! As soon as the first pressing is completed, locking
takes place and prevents a separation of the Press Booster
from the press ring. If you nevertheless need to interrupt the
pressing, see Ä Chapter 3.4 „Interrupting pressing" on page 16.
Immediately after that, carry out the second pressing with the press
machine.
ð You have pressed the Megapress XL press connector to the
steel pipe.
The lock of the Pressgun-Press Booster opens automatically.
If the pressing is not completed after two press strokes with
the press machine and the Press Booster does not open
automatically, carry out another press stroke. This also indi‐
cates a need for maintenance, see
maintenance" on page 18.
Handling
Ä Chapter 3.6 „Care and
15 from 20