Time And Date; Camera Sequence Setup - Philips LTC2377/50 Installation Instructions Manual

5.3

Time and Date

This menu allows you to set the date and time format, the
current time/date and displayed position on the monitor.
Select TIME/DATE and press the
n
menu is displayed:
(1) TIME FORMAT
(2) DATE FORMAT
(3) TIME/DATE SET
(4) DISPLAY : BOTTOM
(5) EXIT
5.3.1 Time Format
Select TIME FORMAT and press the
n
following menu is displayed:
12 HOURS (AM/PM)
Press the 1 key, and toggle to select the required format.
n
Options are:
12 HOURS (AM/PM)
24 HOURS (0000-2359).
Press the key.
n
5.3.2 Date Format
Select DATE FORMAT and press the
n
following menu is displayed:
Press the 1 key, and toggle to select the required format.
n
Options are:
MM/DD/YEAR
DD/MM/YEAR
YEAR/MM/DD
Press the key.
n
key. The following
key. The
TIME FORMAT
key. The
DATE FORMAT
MM/DD/YEAR
5.3.3 Time/Date Set
Select TIME/DATE SET and press the
n
following menu is displayed:
_
12:00:00 AM
HH:MM:SS
TO EXIT PRESS ENTER KEY
<
Press the and
n
required position.
Press the and
n
(Calenders until the year of 2097 are in this menu.)
Press the key.
n
5.3.4 Display Mode Set
Select the DISPLAY function.
n
(1) TIME FORMAT
(2) DATE FORMAT
(3) TIME/DATE SET
(4) DISPLAY : BOTTOM
(5) EXIT
Press the key to toggle through BOTTOM, TOP, and
n
OFF. The Date/Time will be displayed on the monitor in
the selected position.
Select EXIT and press the
n
5.4

Camera Sequence Setup

This menu allows you to adjust the dwell times of the 4 camera
video and the Quad screens.
Select SEQ SETUP and press the
n
menu is displayed:
(1) CAMERA 1 : 9 SEC
(2) CAMERA 2 : 9 SEC
(3) CAMERA 3 : SKIP
(4) CAMERA 4 : 9 SEC
(5) QUAD : 9 SEC
(6) EXIT
Press the and
n
channel.
1.8
TIME/DATE SET
12/31/1999
MM/DD/YEAR
>
keys to move the cursor to the
keys to establish the necessary digit.
key to exit the menu.
key. The following
DWELL TIME
keys to move the cursor to required
key. The