Table of Contents
Advertisement
5.
PROGRAMMING
5.1
LTC 2372 & LTC 2375
No programming required.
VidQuad
5.2
LTC 2376 & LTC 2377
VidQuad
Table (Key Functions)
Key label
Operating Function
VCR
Selects VCR input for display on monitor
Menu
NONE
Seq/
Selects the sequential switching function
ALM ( )
1/
Selects camera 1 for full-screen display on monitor
2/
Selects camera 2 for full-screen display on monitor
<
3/
Selects camera 3 for full-screen display on monitor
>
4/
Selects camera 4 for full-screen display on monitor
/
Selects quad display on monitor
Programming the LTC 2376 and LTC 2377 includes writing
titles for the video inputs, assigning dwell times to each input
and to the quad display for sequencing (SEQ) operating,
enabling or disabling the video loss alarm, and enabling or
disabling the security lock. Each of these functions comes
preprogrammed with a factory default setting.
Press the MENU key to display the programming screen.
n
For the LTC 2376/2377 the following screen is displayed:
(1) TIME/DATE
(2) SEQ SETUP
(3) ALARM SETUP
(4) VCR OUT MODE
(5) CAMERA TITLES
(6) COLOR ADJUST*
(7) PASSWORD SET
(8) EXIT
* LTC 2377 only.
Fig. 6 LTC 2372 and LTC 2375 Front panel
MODE
Seq
VCR
Menu
1
(
)
ALM
Fig. 7 LTC 2376 and LTC 2377 Front panel
DISPLAY
3
2
4
Programming Function
NONE
Enter the programming mode
NONE
Scrolls upward through program selections ; selects
entries
Scrolls downward through program selections; selects
entries
Shifts cursor to the left in menus; selects entries
Shifts cursor to the right in menus; selects entries
Enter or set function
All programming is done with the front panel keys. There
are eight keys on the front panel. The keys named MENU,
1/
, 2/
, 3/
programming the unit.
The VCR and SEQ/
programming the unit. Functions of each key on the front
panel are described in the table above.
1.7
>
<
, 4/
, and
/
are used in
keys are not used in
ALM ( )
PHILIPS
PHILIPS
Advertisement
Table of Contents
