Useful Information And Safety Regulations - Aurora PVI-3.0-OUTD-ZZ Installation And Configuration Manual

1. Useful information and safety regulations

This manual contains important safety instructions which must be carefully followed during the installation and
commissioning of the device. It is advisable to pay particular attention to the paragraphs marked with the symbol
, this will reduce the risk of electric shock and prevent damage to the device.
All the operations described below must be carried out exclusively by qualifi ed staff in compliance with national and local
safety regulations.
For all stages of installation, the instructions and warnings shown in the various chapters must be followed step by step
so as to avoid danger situations or the possibility of damaging the equipment. Every operation that does not comply with
these instructions will lead to the immediate loss of the warranty.
There can be live parts, uninsulated parts and hot surfaces while the inverter is working. Unauthorized removal of the
required protections, improper use, faulty installation or inappropriate operation and tampering with the unit (e.g. adding
extra holes) give rise to the risk of serious damage to persons and things and lead to the immediate loss of the warranty.
The system must be connected to the mains distribution system only after the Body appointed to distribute electricity has
given its approval, as required by the national regulations in force.
Check the national regulations and local standards so that the electric installation diagram complies with them.
Always respect the nominal voltage and current data when planning the system (see the technical data table in Appendix
C).
Photovoltaic Inverters
3 - EN