Advertisement
Available languages
Available languages
sensor on the tank (6) rotating it carefully
clockwise until reaching the stop.
WARNING! Always make sure that the mag-
netic ring has been inserted correctly into the
level sensor, otherwise the humidifier will not
work!
11. Insert the removable essence holder
(4) into the lid (1) making sure that it is
mounted to the special supports provid-
ed (3) as shown in Fig. H.
12. Clean the outer surfaces of the device
with a soft damp cloth using water. Do
not use abrasive products, detergents,
alcohol, solvents or similar products as
they may cause permanent damages to
the surfaces.
13. In order to use the device again, repeat
the procedure from step 5 to step 8
shown in paragraph PRELIMINARY
OPERATIONS and repeat the procedure
shown in paragraph STANDBY / TURN-
ING THE DEVICE ON.
WARNING! If you intend not to use the hu-
midifier after having cleaned it, store the de-
vice and all its components in a clean and dry
place, protected against dust, direct sun light
and heat sources, making sure not to screw
the tank plug (15) too tightly on the water
tank (6).
33
Advertisement
