Fitting Battery; Turn Off The K3 Alarm - ProLogic BITE ALARM K3 Instructions Manual

FITTING BATTERY

ON THE K3 BITE
K3 ALARM
FITTING THE BATTERY FOR K3 ALARM ALARM
FITTING THE BATTERY FOR K3 ALARM
FITTING THE BATTERY FOR K3 ALARM

1.Turn off the K3 alarm

1.Turn off the K3 alarm
1.Turn off the K3 alarm
1
2
3
K3 ALARM
4
5
2. Using the screwdriver unscrew the two screws on the bottom of alarm
2. Using the screwdriver unscrew the two screws on the bottom of alarm
2. Using the screwdriver unscrew the two screws on the bottom of alarm
1
2
3
4
6
5
K3 ALARM
3. Take care removing the Aluminum base,rubber ring,carbon tube
1 6
3. Take care removing the Aluminum base,rubber ring,carbon tube
3. Take care removing the Aluminum base,rubber ring,carbon tube
2
3
4
5
4.Remove the battery and insert new battery and ensure correct polarity
4.Remove the battery and insert new battery and ensure correct polarity
4.Remove the battery and insert new battery and ensure correct polarity
6
5.Re-fit carbon tube,rubber ring,Aluminum base
5.Re-fit carbon tube,rubber ring,Aluminum base
5.Re-fit carbon tube,rubber ring,Aluminum base
Manual K3 Bite Alarm.indd 6
UK
1. Turn off the alarm
2. Using the screwdriver ( supplied ) unscrew the two
screws on the bottom of the alarm
3. Remove carefully the aluminium base, the water
seal ring and the carbon jacket
4. Insert new battery and make sure the polarity is
7
correct ( always use good quality batteries )
5. Re-fit carbon jacket, water seal ring and aluminium
base
8
6. Secure screws with the provided screwdriver
1.Two places for isotope
2.Rubble plate for rod
9
3.Left button:
10
Short press:Volume:0(silence) to 3
11
Long press:Mute 30 seconds
4.Bite Light:
7
12
Run=Left+right flash,continue 15 seconds
8
5.Battery:CR2*1
1.Two places for isotope
13
6.Low power warning(2.4V)
2.Rubble plate for rod
9
10 minutes warning 3 times ;stop after 1 hrs
3.Left button:
10
7.Range:150M~300M
Short press:Volume:0(silence) to 3
11
8.Drop back=right flash,continue 15 second
Long press:Mute 30 seconds
9.Right button:
4.Bite Light:
12
Short press:sensitivity 1-5
Run=Left+right flash,continue 15 seconds
Long press:Power off/on
5.Battery:CR2*1
13
10.Green,yellow,red,blue,purple,white
6.Low power warning(2.4V)
7
11.Carbon shell
10 minutes warning 3 times ;stop after 1 hrs
12.Small size (Φ32*79mm)
7.Range:150M~300M
8
1.Two places for isotope
13.Rubber ring on the boby:
8.Drop back=right flash,continue 15 second
2.Rubble plate for rod
9
Extra increase Green/Yellow/Red/Blue/
9.Right button:
3.Left button:
Purple/White in a plastic bag
Short press:sensitivity 1-5
10
14
Short press:Volume:0(silence) to 3
14.TPR case for bite alarm
Long press:Power off/on
11
Long press:Mute 30 seconds
10.Green,yellow,red,blue,purple,white
4.Bite Light:
11.Carbon shell
12
Battery Type:CR2*1 PCS for Alarm
Run=Left+right flash,continue 15 seconds
12.Small size (Φ32*79mm)
5.Battery:CR2*1
13.Rubber ring on the boby:
13
6.Low power warning(2.4V)
Extra increase Green/Yellow/Red/Blue/
10 minutes warning 3 times ;stop after 1 hrs
Purple/White in a plastic bag
14
7.Range:150M~300M
14.TPR case for bite alarm
8.Drop back=right flash,continue 15 second
1
9.Right button:
Battery Type:CR2*1 PCS for Alarm
Short press:sensitivity 1-5
3
Long press:Power off/on
19/06/18 12:15