Table of Contents
Advertisement
Page 9 of 27
Preparing the patient hard drive
10. Remove the lid on a patient hard drive.
11. Place the provided hard drive lid with a hole on a patient hard drive and tighten it with
the screws previously removed from the original lid.
12. Remove 4 screws from the platter fixation lid that's holding the platters in place. Be sure
to remove screws two by two from opposite sides so that the two screws on the
opposite sides remain.
13. Use 4 screws previously removed to screw the platter holder to the platter fixation lid.
Make sure to screw these screws tightly because these screws will suffer a great amount
of pressure when pushing out the bearing.
Mounting the platter holder on a patient hard drive
HDDSURGERY
Lomina 33, 11 000 Belgrade, Serbia
phone +381 11 361 43 43
www.hddsurgery.com
support@hddsurgery.com
Tools for data recovery experts
Advertisement
Table of Contents
