Table of Contents
Advertisement
Page 19 of 27
33. Unscrew the upper cylinder and then unscrew the butterfly-screws holding the hard
drive in place.
34. Pull out the hard drive from the tool, unscrew the 4 screws holding the platter holder
and remove the platter holder. Screw those 4 screws back in place. Place the lid back on
the hard drive and start cloning the drive.
For a more detailed instruction on how to use this tool, check the video guide and
animation which can be found on our website:
Animation
You can find more information about this tool and many other tools used for data
recovery on our website.
HDDSURGERY
Lomina 33, 11 000 Belgrade, Serbia
phone +381 11 361 43 43
www.hddsurgery.com
support@hddsurgery.com
Unscrewing the upper cylinder
http://www.hddsurgery.com/
Video guide
Tools for data recovery experts
Advertisement
Table of Contents
