Connecting the throat plate slide interrogator
To connect the throat plate slide interrogator:
Assembling the circuit board (if not yet present on CLASSIC
machines)
Fig. 11: Connecting the throat plate slide interrogator (1)
(1) - Bracket
(2) - Screw
1. Loosen the screw (3).
2. Tighten the bracket (1) as shown using screw (3).
3. Tighten the circuit board (4) to the bracket (1) using screw (2).
Additional Instructions 867 M-TYPE - 00.0 - 05/2018
④
③
②
①
(3) - Screw
(4) - Circuit board
11