Assembling the throat plate slide interrogator
Removing the cover on the side (PREMIUM)
Fig. 9: Assembling the throat plate slide interrogator (7)
(14) - Cover on the side
12. Loosen the screws (15).
13. Remove the cover on the side (14) and set it down carefully on the
The cover on the side (14) is still connected to the machine via the
Fig. 10: Assembling the throat plate slide interrogator (8)
(7) - Cable
14. Guide the cable (7) with the cable ties (16) up and along the other
You have successfully assembled the throat plate slide interrogator.
You can now connect the throat plate slide interrogator ( p. 10).
Additional Instructions 867 M-TYPE - 00.0 - 05/2018
⑭
⑮
tabletop next to the machine.
switch housed in the cover.
Do not pull on the cable.
⑯
⑦
cables towards the circuit board.
(15) - Screw
⑯
(16) - Cable tie
9