CAUTION indicates a potentially hazardous The LED rechargeable work lamp situations which, if not avoided, may result DWL 2500 12.0/18.0V is designed for in minor or moderate injury, or may cause – for commercial use in industry and trade, machine damage.
493.635_DWL 2500_12.0_18.0.book Seite 4 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Page 5
493.635_DWL 2500_12.0_18.0.book Seite 5 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Instruction manual (g) Do not expose a battery pack or tool to CAUTION fire or excessive temperature. Exposure to fire or temperature above Do not touch hot parts.
(b) Only FLEX AUTHORIZED SERVICE Dust-proof degree 2 and protection CENTER should disassemble or assemble against ingress of water 0 this power tool, and only genuine FLEX (with battery) replacement parts should be installed. (c) Clean the exterior of the power tool only...
493.635_DWL 2500_12.0_18.0.book Seite 8 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V Overview Support frame USB port LED unit Control element Slot for battery Li-ion battery (2.5 Ah or 5.0 Ah) Handle Release button for battery Mounting option for a tripod...
493.635_DWL 2500_12.0_18.0.book Seite 9 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Instruction manual Operating instructions Battery state of charge WARNING Risk of electric shock! Before carrying out any work on the power tool, always remove the battery. Before switching on the power...
Page 10
493.635_DWL 2500_12.0_18.0.book Seite 10 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V Adjusting light intensity The light intensity of the LED rechargeable work lamp can be adjusted by pressing "+" or "-". The LED display on the left indicates the remaining lighting duration.
NOTE You can mount the LED rechargeable work lamp on a tripod or attach it to any magnetic Only the tools released by FLEX may be used. surface with the aid of a magnet holder. Other accessories, in particular insertion tools, can be found in the manufacturer’s...
FLEX North America limited one which vary from state to state. year warranty FLEX North America warrants its Profes- FCC WARNING sional Power Tools for a period of one year This device complies with Part 15 of the FCC rules.
Page 13
Flex-Elektrowerkzeuge GmbH Bahnhofstr. 15 D-71711 Steinheim/Murr Tel. +49(0) 7144 828-0 +49(0) 7144 25899 info@flex-tools.com www.flex-tools.com Flex-North America, Inc. Warehouse/Distribution Center 2720 E. Phillips Road Greer, SC 29650 (877) 331-6103 (Customer Service) (888) 331-6104 (Fax) Flex-North America, Inc. US-Corporate Office 13057 West Center Street – Suite 6...