Table of Contents
Advertisement
493.635_DWL 2500_12.0_18.0.book Seite 11 Donnerstag, 19. September 2019 1:19 13
DWL 2500 12.0/18.0V
Assembly
You can set up the LED rechargeable work
lamp in any position with the aid of a support
stand.
You can mount the LED rechargeable work
lamp on a tripod or attach it to any magnetic
surface with the aid of a magnet holder.
Maintenance and care
WARNING
Risk of electric shock! Before carrying out
any work on the power tool, always remove
the battery.
Cleaning
Electric power tool
WARNING
Do not use water or liquid detergents.
1. Remove dirt and dust from the housing
with a paint brush or dry cloth.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
NOTE
Only the tools released by FLEX may be used.
Other accessories, in particular insertion
tools, can be found in the manufacturer's
catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com
Disposal information
WARNING
Render redundant power tools unusable:
– by removing the power cord on mains
operated power tools,
– by removing the battery on battery
operated power tools.
EU countries only:
Do not dispose of electric power tools in
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and its incorporation
into national law, used power tools must be
collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of
waste disposal.
Instruction manual
11
Advertisement
Table of Contents
