Specific Safety Rules And Symbols - Flex DWL 2500 Instruction Manual

493.635_DWL 2500_12.0_18.0.book Seite 6 Donnerstag, 19. September 2019 1:19 13
Instruction manual

SPECIFIC SAFETY RULES AND SYMBOLS

1. Safety warnings for
rechargeable LED work lamps
(a) This power tool is intended to function
as a rechargeable LED work light. Read all
safety warnings, instructions, illustrations
and specifications provided with this power
tool.
Failure to follow all instructions listed below
may result in electric shock, fire and/or
serious injury.
2. Additional warnings
(a) The mains voltage and the voltage
specifications on the rating plate must
correspond.
(b) Only FLEX AUTHORIZED SERVICE
CENTER should disassemble or assemble
this power tool, and only genuine FLEX
replacement parts should be installed.
(c) Clean the exterior of the power tool only
with a soft cloth moistened with soapy
water, and dry thoroughly.
(d) Never use solvents, gasoline or thinners
on plastic components; otherwise the
plastic may dissolve.
(e) The light source contained in this luminaire
shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
6
3. Definitions for symbols used on
SAVE THESE INSTRUCTIONS
DWL 2500 12.0/18.0V
this tool
Before switching on the power
tool, read the operating manual!
Disposal information
(see page 11)!
Do not look into the light source!
Rugged lamps IK07
Dust-proof degree 2 and protection
against ingress of water 0
(with battery)
Dust-proof degree 6 and protection
against ingress of water 7
(without battery)
WARNING-Risk of fireMinimum
distance from lighted objects 0.1 m