Power Input - pascom ZONE-120 Operation Manual

ATT 6 ZONE MIXING AMPLIFIER
3. RS232 TERMINAL
Enables PC control in short distance.
(*Only master volume and zone selection is available)
4. DVD OUTPUT TERMINAL
Enables sound and/or visual control of DVD player. Connects with external receiver or
LCD TV.
*Refer to "HOW TO CONNECT" for detail.

5. POWER INPUT

Connects with power cable.
*Double check power voltage before connecting!
6. EM OUT
Sends fire alarm contact signal in case of emergency.
7. POWER ON
Enables remote power control.
8. DC INPUT
Connects with DC power(+24 V) battery for temporary use. Make sure with polarity(+/-).
Cables have to be diameter of 3.0mm or over, and length of 8m or less. (power loss ≤1V,
FUSE is F3, F4 on POWER PCB)
- Capacity Remarks:
ZONE-120 : T10A/250V ZONE-240 : T20A/250V
ZONE-360 : T15A/250V X 2 ZONE-480 : T20A/250V X 2
ZONE-600 : T25A/250V X 2
9. EXTERNAL DEVICE JACK
- AMP IN : When connected, all other speaker output is muted but only
signals by this connection is released.
- PRE OUT, REC OUT : Used for another external device to record sound of this device,
* REC OUT level is -10dB, PRE OUT level is 0dB.
- PC IN ST/BAL : receives sound signal from PC.
* PC connection remarks:
STEREO Jack with TIP(LEFT), RING(RIGHT), SLEEVE(GND)
BALANCE with TIP(HOT), RING(COLD), SLEEVE(GND)
- PC OUT : When connected, PC signals received can release to linked amplifier.
(BALANCED)
8. ZONE-120/240/360/480/600
or used for another amplifier by parallel connection.