Error Codes - Hitachi SF-170ZCV Instruction Manual

Error Codes

Error
Description
code
Laundry overload
Water is not
supplied
Water does not
drain
The tub does not
spin
The lid cannot be
locked
The lid lock
cannot be
released
The spinning
speed does
not reach the
specifi ed value.
n If warning sign such as "F0", "F9"...etc. are shown in the display, stop operating the washer immediately
and contact an authorized service dealer or a service agent for further inspection and/or repairing.
30
Things to check
Check if the laundry overloaded?
Is the tap open?
Has dirt collected in the water supply inlet
fi lter?
Are the water pipes or water supply hose
frozen?
Has the water supply been disrupted?
Is the drain hose blocked?
Is the drain hose twisted, crushed, or frozen?
Is the drain hose connected correctly?
Is the drain outlet too high?
Is the lid open?
Is the laundry all on one side of the tub?
Does the laundry include too many thick
items like cotton blankets or jeans or too
many large items like sheets?
Is the washing machine wobbling, or is the
fl oor under the washing machine slanted?
Are there any unwashable things in the tub?
→Page 8: Preparation of the laundry (sorting
the laundry)
Is the lid closed?
Are there any foreign objects in the lock?
Are there any foreign objects in the lock?
Check if there is too much detergent?
Check if the drain hose is clogged?
Check if the drain hose is installed correctly?
Solution
Decrease the amount of
laundry according to the
instructions on page 18.
Check the tap, water
supply inlet fi lter, water
pipes, and water supply
hose.
Check the drain hose and
the drain outlet.
Close the lid.
Add a few more items to
wash. (If there is only one
item in the tub, it is likely to
become unbalanced.)
Check that the lid is
completely closed. Check
that there are no foreign
objects in the lock.
Turn the power off and
then on again and wait a
little while. If the lid is still
locked, contact a service
center for repair.
Check the amount of
powder detergent used.
Check the drain hose and
its installation.