Installation; Choice Of The Installation Site; Minimum Spaces; Mod.04-08-10 - Ferroli FCS-C Series Installer Manual

INSTALLATION

CHOICE OF THE INSTALLATION SITE

Positions to avoid:
· Places in direct sunlight.
· Positions near heat sources.
· Damp places and positions where the unit could come into contact with water (e.g.: washrooms).
· Places where shelves or furniture could prevent the air from circulating correctly.
What to do:
· Choose a position without obstructions that could hamper the air inlets and outlets.
· Choose a position where the appliance is easy to install.
· Choose a position that complies with the recommended minimum space for maintenance work.
· Choose a position that allows air to freely circulate around the room.
· Install the appliance so that the condensation can be easily drained off.
· Choose a position possibly in the middle of the room. Adjustment of the outlet air can then be optimized to
reach all parts of the room.
· The best position of the fans is generally the one that allows air to be blown on to the ceiling by means of the
Coanda effect. The fins can also be set in the fully closed position, with the limitations shown in the figure.
· Check to make sure that the chosen position allows the panels to be sufficiently removed from the ceiling to
allow the installation and maintenance operations to be carried out.
· Do not install the appliance where water can drip on to it.

MINIMUM SPACES

It is recommended as minimum clearances shown in Fig.
Mod .04-08-10
>20
Inspection
>1500
200
hatch
450x450
Mod .12-16-20
1800<H<3000
200
Inspection
hatch
450x450
33