Battery Recharge - Midland G15 Instruction Manual

Whenever any signal is detected, scanning will stop on a busy channel
f no , will start after 5 seconds.
If you press the PTT, the radio will transmit on the latest busy channel
fter 10 seconds releas the PTT, G15 will return the default
channel and scanning will be active .
Squelch
The Squelch function suppresses noises on free channels and allows receiv
even weak signals.
G15 has 10 different Squelch levels that can be set by programming software:
0 means that the Squelch is turned off evel 1 to level 9 different levels
of noise reduction.
Make sure you do not set an excessively high squelch level because in this case
you may not be able to receive weaker signals. On the other hand an excessively
low Squelch value could enable the Squelch even when no signals are present.
Squelch must always be adjusted when no signals are present.
The Time Out imer is settable from 30 sec to 270 sec through the
ing software. This feature is disabled by default.

Battery recharge

G15 is equipped for using a 7 4V Li-ion rechargeable battery pack which
can be charged the
It takes 4 hours to fully recharge the radio. The of the
desktop charger indicates the status:
Red = charging, Green = full charge
For maximum battery life we recommend charging the battery pack when
the G15 is off and the battery pack is fully discharged.
Using a different battery charger other than the one specified can cau
damage to your device or may even cause explosions and personal injuries.
Midland G15 instruction guide |