Figure 5: Startup progress monitor
Run Testing
Run Testing
Run Testing
Run Testing
Figure 6: Enter project pop-up
N7280- - - - 90011
N7280
N7280
N7280
90011 – – – – Rev A
90011
90011
Rev A
Rev A
Rev A
1 1 1 1
Depending on how the software has been set up, you
may be asked to choose the project to load. If prompted,
select the appropriate project and click OK (see Figure
6). If not, continue with Step 2.
2 2 2 2
Depending on how the software has been set up, you
may be asked to enter the panel serial number. If
prompted, enter the panel serial number and click OK
(see Figure 7). If not, continue with step 3.
6
Operator Instructions
Operator Instructions
Operator Instructions
Operator Instructions