Installation; Unpacking And Checking The Scope Of Delivery; Storing The Unit - Nordmann Engineering AT4 D SPA Display Installation And Operation Manual

4

Installation

4.1

Unpacking and checking the scope of delivery

Unpacking the unit
Open the packing and check the delivery for completeness. Please contact your Nordmann represent-
ative in case something is lacking, they will be glad to send you the missing part without delay. The
standard delivery includes:
– Nordmann AT4 D SPA Display flush-mounted
– Nordmann AT4 D SPA Display control PCB
– Flush-mounted housing with pre-mounted display mounting supports, fastening claws and
3 magnets
– Plastic bag containing mounting material
– Nordmann AT4 D SPA Display surface-mounted
– Nordmann AT4 D SPA Display control PCB
– Surface-mounted housing
– Plastic bag containing mounting material
– Decoration cover with pre-mounted centring frame and sealing (if ordered)
Please check the equipment for damage. Please report any damage to your Nordmann representative
and to the carriers, as required.
Packaging
The original packaging of the Nordmann AT4 D SPA Display was designed for optimum safety during
transportation. Please preserve the original packing material in case you once have to return the unit
for some reason.
In case you wish to dispose of the packaging, observe the local regulations on waste disposal. Never
dispose of the packaging to the environment.
4.2

Storing the unit

If the external steam bath control must be stored, store it in a protected area (best in the original pack-
aging) meeting the following requirements:
– room temperature: 1 ... 40 °C
– room humidity: 10 ... 80 %rh (non condensing)
9