Easy Kit Mode Setting - Fujitsu MB95200 Series Setup Manual

2.5 Easy Kit Mode Setting

A mode switch on Easy EV-Board is used to select Easy Kit between debug mode and free
run mode, as shown in the figures below.
Mode switch
Set mode switch on Easy Kit to debug mode as Figure 2.5-3. In this mode, after connecting
the Easy Kit to USB interface, user could start debug in the SOFTUNE on PC.
Set mode switch on Easy Kit to free run mode as Figure 2.5-4. In this mode, the target MCU
is in free run mode after connecting Easy Kit to USB interface.
Easy Kit FMCDC-MB95260H-EK-01 V1.2
Chapter 2 2BEasy Kit Manual
Figure 2-7: Mode Switch from Top View
Figure 2-8: Mode Switch from Top View
Figure 2-9: Easy Kit Debug Mode Setting
Figure 2-10: Easy Kit Free Run Mode Setting
MCU-AN-500059-E-12 – Page 11
Mode switch