Set The Sleeptimer; Reduce The Nr; Use Your Tv As A Pc Monitor; Select Your Tv In Pc Mode - Philips 230T1SB/75 User Manual

Change picture format
z
1. Press OO M on the remote control to enter
the Picture format menu.
z
2. Toggle the " OO M " button on the RC to select
the format that is best fit in with your contents.
6.5 Set the sleeptimer
Sleeptimer switches the TV to standby after a defined
period of time.
1. Press SLEEP on the remote control and select
one of 30,45,60,90,120 minutes
6.6 Reduce the NR
This section describes how to filter out and reduce
the image noise and improves picture quality when
receiving weak video signals.
1. Press HDMI , then MENU
and select Video > NR.
Æ to enter the list.
2. Press
Î or ï to select on or off.
3. Press
4. Press MENU to exit.,
6.7

Use your TV as a PC monitor

Using a VGA cable connects a PC to your TV as a PC
monitor.
B
Caution
Before you connect your PC, set the PC monitor
refresh rate to 60Hz.
6.7.1. Supported screen resolutions
The following screen resolutions are supported in
PC mode:
Sleeptimer .
on the remote control
6.8
1.
2.
3.
4.
E
200T1:
Resolution Refresh rate
640 x 480 60Hz, 72Hz, 75Hz
800 x 600 60Hz, 56Hz, 72Hz, 75Hz
1024 x 768 60Hz, 70Hz, 75Hz
1280 x 720 60Hz, 75Hz
1280 x 768 60Hz, 75Hz
1360 x 768 60Hz, 75Hz
1280 x 1024 60Hz, 75Hz, 72Hz
1400 x 900 60Hz, 70Hz
1600 x 900 60Hz
E
1600 x 900 is recommended resolution.
220T1:
Resolution Refresh rate
640 x 480 60Hz, 72Hz, 75Hz
800 x 600 60Hz, 56Hz, 72Hz, 75Hz
1024 x 768 60Hz, 70Hz, 75Hz
1280 x 720 60Hz, 75Hz
1280 x 768 60Hz, 75Hz
1360 x 768 60Hz, 75Hz
1280 x 1024 60Hz, 75Hz, 72Hz
1400 x 900 60Hz, 75Hz
1680 x 1050 60Hz
1920 x 1080 60Hz
E
1920 x 1080 is recommended resolution.
230T1:
Resolution Refresh rate
640 x 480 60Hz, 72Hz, 75Hz
800 x 600 60Hz, 56Hz, 72Hz, 75Hz
1024 x 768 60Hz, 70Hz, 75Hz
1280 x 720 60Hz, 75Hz
1280 x 768 60Hz, 75Hz
1360 x 768 60Hz, 75Hz
1280 x 1024 60Hz, 75Hz, 72Hz
1400 x 900 60Hz, 75Hz
1680 x 1050 60Hz
1920 x 1080 60Hz
E
1920 x 1080 is recommended resolution.

Select your TV in PC mode

Press MENU on the remote control and select
Features > Source list.
Select PC and press OK to confirm your choice.
If necessary, adjust the picture settings as
described in Change picture settings section.
Press MENU to exit.
Tip
Set the picture format to Full screen or 4:3 in PC
mode.
EN-15