Connect The Ac Power Cord; Switch On The Tv; Manage Cable - Philips 230T1SB/75 User Manual

Connect to a cable receiver box
75ΩANT
75ΩANT
Cable Receiver Box
A cable receiver box can be connected to the TV
through the following connections:
Ω)
• ANTENNA (75
• A/V (Composite Video and Audio)
• S-Video and Audio
• YPbPr (Component Video Input)
• HDMI
Connect a cable receiver box through
component video input or HDMI
75ΩANT
75ΩANT
4.6 Connect the AC power cord
B
Warning
Verify that your voltage corresponds with
the voltage printed at the back of the TV.
Do not insert the AC power cord if the
voltage is different.
To connect the AC power cord
ANTENNA
1. Locate the power connector at the back of the
TV.
The location of the power connector varies
according to TV model.
2. Insert the AC power cord fully into the TV
power connector.
3. Connect the AC power cord plug to the power
outlet. Ensuring that the cord is tightly secured
at both ends.
4.7
Before you switch on the TV, check that the mains
cord is properly connected. Press POWER button
at the side of the TV, or press power button on
the remote control. The TV normally takes 10-15
seconds to start up and the following screen appears
the first time you turn on the TV.
4.8
Route your AC power cord, antenna cable and all
other device cables through the cable holder at the
back of the TV. The holder helps keep your cables
tidy and easily manageable.

Switch on the TV

Manage cable

75ΩANT
75ΩANT
POWER
EN-9