Crosswater TH2-RGH Installation Instructions

Dual-control thermostatic valve rough

Download this manual

Dual-control Thermostatic Valve Rough

TH2-RGH

Installation Instructions

For ease of installation you will need:

● To read the installation instructions completely before beginning.

● To read all warnings, care, and maintenance information.

Before beginning installation, check for any

damage that may have occurred during transport.

Note: Damage claims cannot be made during

or after installation.

15122953

Need help?

Do you have a question about the TH2-RGH and is the answer not in the manual?

Page 1 Dual-control Thermostatic Valve Rough TH2-RGH Installation Instructions Before beginning installation, check for any For ease of installation you will need: damage that may have occurred during transport. ● To read the installation instructions completely before beginning. Note: Damage claims cannot be made during ●...
Page 2 TH2-RGH Installation Instructions 2-3/4 ＂ - 3-1/4" 2-3/4 ＂ - 3-1/4" Mounting hole Best if finished wall is flush to this surface. This valve is designed to fit into a Using mounting holes secure the Turn off the water supplies. Install the wall that is 2-3/4”...
Page 3 This thermostatic valve has been preset at the factory to deliver water at a maximum of 120ºF. If you would like to change this setting please refer to the Installation completed. temperature change instructions noted in the trim installation instructions for this valve. Replacement Parts NO.
Page 4 4-1/4" 5-7/8 ＂ 4-3/4" Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website. For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com email: technical@crosswaterlondon.com...