Crosswater EV1253EC Installation Instructions

Crosswater EV1253EC Installation Instructions

Kia thermostatic shower valve exposed

Advertisement

Quick Links

This product should only be fitted by a qualified plumber to NVQ (National Vocational Qualification)
or SNVQ (Scottish National Vocational Qualification) Level 3. Should the installation be completed
by a non-qualified person then the guarantee may be considered invalid.
For a claim made under our warranty written certification of your installers credentials can be
required. For further information or to find a qualified installer in your area please visit the Institute
of Plumbers website - www.iphe.org.uk

THE QUALIFICATIONS

At present, to be a plumber you need to follow the National Vocational Qualification (NVQ) route
(Scottish National Vocational Qualification - SNVQ - in Scotland). These qualifications are made up
of theory and practical work in the classroom/purpose built training facility and work based
experience with a working plumber. Colleges should help students find a work placement,
although many students organise it themselves.
The S/NVQ qualification works in levels. All recently qualified plumbers should hold S/NVQ Level 2
as basic with Level 3 as the preferred level. Level 2 will give you the foundation you need for a
career in plumbing and teach you domestic plumbing to a satisfactory level. Level 3 is more
comprehensive and deals with domestic, commercial and industrial plumbing along with aspects
such as gas - if you want to one day set up your own business, this is the level to reach. The
Institute of Plumbing and Heating Engineering, and the industry as a whole recommends that all
plumbers reach a minimum of Level 3.
Reaching Level 3 has other advantages. The Institute runs a Master Plumber Certificate, which
only those attaining Level 3 or equivalent can reach as long as they have the relevant experience as
well. Those with S/NVQ Level 3 can (once in membership with the Institute for five years as a
Member MIPHE) gain Engineering Technician EngTech status with the Engineering Council (UK).
For any further information please contact
Crosswater on: 0845 873 8840
Or visit our web-site at www.crosswater.co.uk
The manufacturer reserves the right to make technical
modifications without prior notice.
Kia Thermostatic Shower Valve Exposed
EV1253EC
Installation INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EV1253EC and is the answer not in the manual?

Questions and answers

Summary of Contents for Crosswater EV1253EC

  • Page 1 Member MIPHE) gain Engineering Technician EngTech status with the Engineering Council (UK). For any further information please contact INSTALLATION INSTRUCTIONS Crosswater on: 0845 873 8840 Or visit our web-site at www.crosswater.co.uk The manufacturer reserves the right to make technical modifications without prior notice.
  • Page 2 EV1253EC INTRODUCTION CALIBRATION Please read these instructions carefully and keep in a safe place for future reference. General Installation Requirements The installation must comply with regulations of the Local Water Authority as contained in their The mixer has been adjusted to a safe showering temperature under ideal conditions bylaws.
  • Page 3 EV1253EC INSTALLATION DIMENSIONS First shut off your water heating system then. With your mains stop cock closed, open the lowest hot and cold taps in the house and allow to run until the cold storage tank and pipes are empty (the hot water storage cylinder always remains full).
  • Page 4 EV1252EC EV1253EC MAINTENANCE CLEANING THE THERMOSTATIC CARTRIDGE The concealed cartridge should give trouble free service, but in the event of any problems, servicing is straight forward. 1- COVERING To remove the thermostatic cartridge. 3 - HANDLE PLATE First shut off the water supply to the tap.

Table of Contents