Get Started; Mounting The Stand; Position The Monitor; Wall Mount The Monitor - Philips 220TS2LB/75 User Manual

4.

Get started

This section describes how to position and connect
your Monitor, and how to perform your first-time
installation.
4.1

Mounting the stand

Step 2 Put the base on a table
Step 3 Insert base into column
EN-8
4.2

Position the Monitor

B WARNING
Do not insert the power plug into the wall
socket before all the connections are done.
Large screen Monitors are heavy. Two people
are required to carry and handle the Monitor.
Wherever you decide to position your Monitor,
ensure that you always have easy access to the AC
power cord or plug to disconnect the Monitor from
the power.
If the Monitor is mounted on a swivel base or swivel
arm, ensure no strain is placed on the AC power
cord when the Monitor is swivelled. Strain on the
AC power cord can loosen connections. This may
cause arcing and result in fire.
For ideal viewing conditions, position the Monitor
where light does not fall directly on the screen.
The ideal viewing distance for watching Monitor is
three times its screen size.
Kensington security slot
Your Monitor is equipped with a Kensington Security
Slot at the back of the Monitor.
If you connect an anti-theft Kensington lock (not
supplied), position the Monitor within reach of a
permanent object that can be attached to the lock.
4.3

Wall mount the Monitor

B Warning
Wall mounting of the Monitor should only be
Philips Electronics N.V. bears no responsibility
for improper mounting that results in accident
or injury.
HDMI-1 VGA PC IN AUDIO
Y Pb Pr L R
CV IN
Video L R Video L R
AV
AV IN -1
OUT