Adjust Video Settings; Use Preset Picture Mode - Philips 220TS2LB/75 User Manual

6.4

Adjust video settings

This section describes how to adjust your video
settings.
1. Enter Setup menu.
2. Video
OK to enter.
Preset
Video
Brightness
Contrast
Audio
Color
Sharpness
Feature
Noise reduction
Color temp.
Channel
Size
3.
4.
OK to confirm the change.
5. Press MENU to exit.
Summary of video settings
The following picture settings can be configured.
Depending on the format of the video source, some
video settings might not be available.
Preset - Changes the format of the picture.
Brightness - Sets the brightness of the picture.
Contrast - Sets the level of white in the picture.
Color - Sets the level of saturation.
Sharpness - Sets the sharpness of fine details.
Noise reduction - Sets the noise removal
mode.
Color temp. - Sets the color temperature.
Size - Sets the displaying size of the picture.
D Note
Any adjustment of brightness, color, contrast, or
sharpness will be stored into Personal at preset
picture mode section.
EN-16
OK to enter the setting.
6.5

Use preset picture mode

1. Press PICTURE on the remote control to set
your Monitor to a pre-defined picture setting.
2. Press PICTURE again to select one of the
following settings:
Personal - The customized settings you defined
by using the Picture menu.
Vivid - Vivid picture settings and clear sound for
high action.
Standard - For normal viewing.
Movie - Brilliant picture settings for a cinematic
experience.
ECO mode - Economically and friendly settings
for lower power consumption.