Table of Contents
Advertisement
EP Espresso Preventative Maintenance- ...
Step 7
Step 8
Clean handle and using "wet" bike lubricant, lubricate slots and bearing on both sides.
Reinsert handle and check microswitch functionality by actuating the lever in both the middle and
down positions. If the module is set for manual and automatic dispense mode, the middle position
should display the word "manual".
After confirming that the middle position engages "manual" on the screen, pull the handle the rest
of the way down to "auto" mode and listen for the pump to activate.
This document was generated on 2020-02-03 10:34:49 AM (MST).
© 2020
Guide ID: 55 -
Release:
Remove tap handle. Reference this
video for proper handle removal.
Be conscious of microswitches while
removing handle.
modbar.dozuki.com/
espresso ep pm rev...
[minor]
2019-04-04
Page 7 of 7
Advertisement
Table of Contents
Need help?
Do you have a question about the EP Espresso Series and is the answer not in the manual?
Questions and answers