Table of Contents
Advertisement
EP Espresso Preventative Maintenance- ...
Step 5
Check individual heat zones by going into the advanced settings page 2 and selecting manual
temperature mode.
Save and exit back to the home screen and go through each heating group to ensure it is
maintaining a temperature close to the set value.
Step 6
Make sure to unplug the module before checking the power switch!
Check the that both sets of power blocks are tight.
Check to make sure that the switch is tightly fastened to the front panel of the module by checking
the screw at the top and the bottom of the switch.
This document was generated on 2020-02-03 10:34:49 AM (MST).
© 2020
Guide ID: 55 -
Release:
modbar.dozuki.com/
espresso ep pm rev...
[minor]
2019-04-04
Page 6 of 7
Advertisement
Table of Contents
Need help?
Do you have a question about the EP Espresso Series and is the answer not in the manual?
Questions and answers