EN GLI SH ® SDS MAX COMBINATION & CHIPPING HAMMERS D25501, D25601, D25602, D25603, D25820, D25831 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make WALT one of the most reliable partners for professional power tool users. Technical Data D25501 D25601...
EN G LI SH differ. This may significantly increase the D25820, D25831 exposure level over the total working 2000/14/EC Electrical concrete breaker (hand held) period. m </= 15kg, Annex VIII; TÜV Rheinland Product An estimation of the level of exposure to Safety GmbH (0197), D-51105 Köln, Germany, vibration should also take into account Notified Body ID No.: 0197...
Page 8
EN GLI SH 2) ELECTRICAL SAFETY Do not overreach. Keep proper footing and balance at all times. This Power tool plugs must match the outlet. enables better control of the power tool in Never modify the plug in any way. Do unexpected situations.
EN G LI SH 5) SERVICE Red service indicator LED. For detailed Have your power tool serviced by a description see under Service Indicator qualified repair person using only identical LED's. replacement parts. This will ensure that the safety of the power tool is maintained. Yellow service indicator LED.
EN GLI SH i. Side handle clamp – minimised break-out when chiselling or drilling in soft or brittle materials; j. Steel ring – optimal tool control for precise chiselling. k. Bush l. Tool holder Torque Limiting Clutch m. Locking sleeve WARNING: The user must always n.
EN G LI SH indicator starts to flash if there is a fault with the tool When using a cable reel, always unwind the cable or the brushes have completely worn out (refer to completely. Brushes under Maintenance). ASSEMBLY AND ADJUSTMENTS D25831 WARNING: To reduce the risk of The red service indicator LED (r) lights up if there is...
EN GLI SH 4. Slide and rotate the side handle to the desired 1. Rotate the mode selector switch (f) until it points position. towards the position. 5. Lock the side handle in place by tightening the 2. Rotate the chisel in the desired position. knob (p).
Page 13
EN G LI SH 3. Release the button to lock rod into position. Switching On and Off (fi g. 1) When drilling with the depth rod, stop when end D25501, D25601, D25602, D25603 of rod reaches surface of material. To turn the tool on, depress the trigger switch (a). OPERATION To stop the tool, release the trigger switch.
EN GLI SH 4. D25601, D25602, D25603 only: Turn the This machine is not user-serviceable. Take the electronic speed and impact control dial (g) to a tool to an authorised D WALT repair agent after medium or high speed setting. approximately 150 hours of use.
EN G LI SH GUARANTEE A depth rod is available, at additional cost, as an optional accessory. Consult your dealer for further information on the WALT is confident of the quality of its appropriate accessories. products and offers an outstanding guarantee for professional users of the product.