Getting Started - Darkly Labs Emblaser Core User & Assembly Manual

GETTING STARTED

Preparation
A medium size table should be enough space to construct your Emblaser Core.
Allow yourself 2-3 hours to complete the kit assembly.
Use powered drivers at your own risk!
We recommend using hand tools supplied, as some parts may be damaged by overtightening.
Whats in the Box
Box 1 Getting Started card, LightBurn license & assembly components.
Box 2: Contains the bulk of the assembly components.
Box 3: Contains optional extras.
Box 4: Contains the linear rails and driver board cover.
Underneath these four packages are the Base Plate and Acrylic Panels.
Running into trouble?
If you get stuck or have any questions, comments or feedback, please contact us at:
support@darklylabs.com
5