Connecting The Backpack Battery To The Power; Tool; Connecting The Backpack Battery To A Power Tool With An Integrated Socket; Connecting The Backpack Battery To A Power Tool With A Battery Compartment - Stihl AR 1000 Instruction Manual

12 Connecting the Backpack Battery to the Power Tool
► Adjust the harness straps so that the back padding fits
firmly and securely against your back.
► Thread the end of the waist belt through the loop (3).
► To remove the harness, open the quick-release fasteners
on the waist belt and chest strap and loosen the harness
straps by lifting the sliding adjusters.
To help reduce the risk of injury in the event of an
emergency, practice quickly opening the fastener on the
waist belt, loosening the shoulder straps and removing the
battery. To avoid damage, ease the battery to the ground
when practicing. Do not allow the battery to drop to the
ground and do not throw it.
12 Connecting the Backpack Battery to
the Power Tool
12.1 Connecting the Backpack Battery to a Power
Tool with an Integrated Socket
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 5.1. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 5.1.
0458-794-8621-C
3
WARNING
To reduce the risk of unintended activation, never store the
power tool with the connecting cord inserted into the power
tool socket, @ 16. Always remove the connecting cord
before storing the power tool.
To connect the battery to a power tool with an integrated
socket:
► Line up the arrow on the connecting cord plug (1) with the
arrow on the power tool socket (2).
► Push the plug into the socket with steady, even pressure
until it is fully inserted. The battery and power tool are now
connected.
For further information on activating and operating the
power tool, see the instruction manual of the power tool
being operated with this battery.
Since a new battery is not fully charged, STIHL recommends
that you fully charge the battery before using it the first time,
@ 8.2.
12.2 Connecting the Backpack Battery to a Power
Tool with a Battery Compartment
WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery or AP adapter, @ 5.1. Use and store the
battery only within an ambient temperature range of 14 °F to
122 °F (- 10 °C to 50 °C), @ 5.1.
English
2
1
15