For your safety Warnings about risks where non-observance DANGER of the measures may directly cause death or serious injury. Warnings about risks where non-observance WARNING of the measures may cause death or serious injury. Warnings about risks where non-observance of CAUTION the measures may cause injury.
Page 4
1. Making the print head ready for use 1.1. Opening the pack _ Fig. Cut open foil pouch with shears. „ Remove printing cartridge „ 1.2. Releasing the clip _ Fig. The print cartridge is supplied with a reusable dust cover Slightly push apart the latching wings „...
3. Storage Fig. MP ink is fast-drying. The time it takes the print nozzles to dry up depends on the ambient temperature and the humidity. Put the device into the station during short print breaks or close the nozzle cover. Observe acoustic signals of the device.
5. Troubleshooting Fig. Dried ink on the print nozzles may result in streaks or reduced print quality. 5.1. Cleaning mechanism Observe notes on cleaning of the print nozzles in the „ operating instructions for the device. 5.2. Cleaning the print head nozzles manually We recommend the following measure if the cleaning mechanism does not lead to the desired success: To remove dried ink, press a soft cloth, if necessary lightly...
Need help?
Do you have a question about the P3-MP and is the answer not in the manual?
Questions and answers