Write And Send An E-Mail - Philips CT3508/ASUSA0P2 User Manual

Mobile phone
Table of Contents

Advertisement

Advanced
The menus described in this section feature advanced
settings that may have been pre-configured, so you
shouldn't have to change any of them.
If the fields of these menus are empty, or if you
encounter connection problems, contact your ISP.
Port
POP3: allows you to enter the POP3 port number,
which is used to receive e-mails.
SMTP: allows you to enter the SMTP port
Port
number, which is used to send e-mails.
address: allows you to enter the DNS address of
DNS
the external data network you want to connect to.
authenticat.: allows you to activate/deactivate the
SMPT
authentication process with the SMTP server.
In most European countries, this menu should be set to
Off: your e-mails will NOT be sent if set to On. Contact
your provider for complete information.

Write and send an e-mail

The
Send mail
e-mails to one or several recipients at a
time, including with an attachment such
as a jpeg picture. Once received, your messages can be
forwarded and the attachments visualised with the
appropriate software.
50
menu allows you to send
T o one or several recipients
,
1.
Press
, select
Messages
or
E-mail 2
depending on the one you wish to use.
Select
and press
Send mail
-
2.
Move
to select
Add addressee
access the list.
If you select the phonebook «On SIM card», you will
not be able to access any e-mail address, but an edit
window will allow you to enter one. See "Phonebook"
page 25 for information on phonebook selection.
3.
Select a name in the list and press
your mailing list or press
back to the previous sub-menu.
4.
Back to the
Addressees
the e-mail address or to
select
addressee, press
Add
phonebook again and add new names to the
mailing list.
5.
Repeat steps 2 to 4 to add as many recipients as
required.
6.
Select
and press
Validate list
subject of your e-mail (you can leave this field
,
empty) and press
> E-mail, then
E-mail 1
,
.
,
and press
,
to add it to
c
to cancel and go
,
list, press
to
Change
it from the list, or
Remove
,
to access the
,
. Then enter the
.
Messages
to

Advertisement

Table of Contents
loading

Table of Contents