Table of Contents
Advertisement
Switch on the phone
1.
To switch on the phone, long press the
key.
2.
When you switch on the phone, you may be
prompted to enter the PIN code, which is the 4
to 8-digit secret code of your SIM card to protect
it from unauthorised use. It is preconfigured and
communicated to you by your operator or
retailer. To personalise the PIN code, see
page 40.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
3.
Enter your PIN code. If you make a mistake,
c
press
. Then press
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then press
Proceed in the same way to set the time.
For complete date and time options, see page 43.
Getting started
)
,
#
or
to confirm.
,
to validate.
Copy the SIM phonebook
If you do not copy the SIM phonebook at very first
switch, you will be able to do it directly from the
Contacts menu (see page 26).
If you had a mobile phone before and are using the
same SIM card, the card might contain all or part of
your current phonebook. The mobile phone detects
this and a message asks you if you want to copy your
SIM phonebook onto the built-in phonebook. Press
c
,
to cancel or
to accept.
Whether you accepted, aborted or cancelled the copy,
the phonebook located on your phone is always
automatically set as your default phonebook. To switch
back to the SIM phonebook, press
>
>
Contacts
Settings
Contacts select
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low.
We recommend that you do not remove the battery
when the phone is switched on: you may lose all your
personal settings (see information on battery safety,
page 91).
,
and select
>
In SIM
card.
7
Advertisement
Table of Contents
