If the «Memory full» icon is displayed (see page 88),
you must delete items to free some memory.
Settings
Your phone may have been pre-configured to directly
access the services offered. If not, you must have
received from your operator the information items
described in the present section and enter them as
given.
With some operators, access parameters can be set
«over the air». Please check directly by your operator.
Network account
Allows you to choose a data profile from the ones you
have set (see "Access settings" page 41 for complete
information on how to configure or modify a data
profile). This profile and the parameters it features
will then be used for connection.
Bearer
This menu allows you to select the type of network
used when launching a connection.
GSM
Your mobile will only use the GSM
network for connections.
MMS
GPRS
Your mobile will only use the GPRS
network for connections.
GPRS first
Your mobile will first try to connect
to the GPRS network, then to the
GSM network if the GPRS network
isn't available when connecting.
If selecting GPRS first, you must have configured both
the GSM and GPRS settings (see "Access settings"
page 41).
MMS Centre
Allows you to enter or change the MMS address of the
server your phone will connect to.
Gateway address
Allows you to enter or change the IP address of the
server's gateway.
Gateway port
Allows you to enter or change the Port number of the
server's gateway.
You must have the information relating to the three
points above, supplied by your operator, and must
enter them exactly as given.
63