Timed-Tx Mode; Setting Auto/Manual Tuning; In Case An Unusual Condition Dccurs; During Operation - JRC Radar 3000 Instruction Manual

4.23 TIMED-TX MODE

The TIMED-TX mode allows the operator to program the radar to automati-
cally transmit for a programmed period followed by a standby period. This
permits the user to maintain a radar watch while reducing the power consump-
tion experienced during full transmit operation. In TIMED-TX mode press the
STBY/OFF key and the radar will return to its normal operating mode.

4.24 SETTING AUTO/MANUAL TUNING

The tuning control can be selected either automatically or manually. If the manual
tuning control is selected, the tuning bar indicator is present. The auto tune
mode will automatically tune the radar for optimum reception whenever the
radar is turned on, even if ranges changed.
4.25 IN CASE AN UNUSUAL CONDITION OCCURS

DURING OPERATION

If the operator encounters unusual conditions, such as:--
・
The screen is disturbed.
・
The machine accepts no key input.
While manipulating, initialize RADAR 3000 by following the steps given be-
low.
(a) Press the STBY/OFF and X-MIT OFF keys simultaneously.
The RADAR 3000 is turned off.
(b) Press the EBL/VRM and STBY/OFF keys simultaneously.
All settings except the initial settings established through the "INITIAL
SETTING" menu are reset to their factory-set values.

4.26 LANGUAGE

The radar menu can be displayed in one of six languages. They are English,
Spanish, French, German, Norwegian and Italian. After selecting any language,
the menu and the oper. prompts will also change to that language. A master
reset will return the display setting to English.
① Press the JOYSTICK.
② Select the "LANGUAGE" from the "RADAR SET-UP" menu.
③ Select desired language.
④ Press the JOYSTICK to exit the language setting mode.
OPERATION 29