Using The Onis 200 Handset With Two Base Stations; Selecting A Base Station; Unregistering A Handset Onis 200 - Philips TD6736/BH051P User Manual

Reglages 23/04/01 10:07
Using the ONIS 200 handset with two base
stations
Each ONIS 200 HANDSET can be used with up to four BASE STATIONS. A different external line
corresponds to each base station.
To use a handset with another base station, the handset must first be registered with that base station
(see page 40).
To do this, use the following procedure:

Selecting a base station

The handset will automatically operate with the last base station to which it was added.
To select the base station:
From "Handset settings" in the "Settings"
1
menu, scroll to "Select base" and select OK|.
Scroll to choose the base station you want
2
and select OK|.
L NOTE:
If the handset exceeds its range, it will automatically search for another base station on the list.

Unregistering a handset Onis 200

This function allows you to unregister a HANDSET Onis 200 when it is no longer used.
Scroll to "Unregister" under the
1
"Handset settings" in the "Settings" menu on
your handset and select OK|.
Scroll to the base station you wish to
2
unregister and select OK|.
Enter the base station registration code and
3
select OK|.
L NOTE:
To re-register the handset with the base station, follow the procedure described on page 40.
Page 41
√
PHILIPS 1
BACK
PHILIPS 1
BACK
Registration
_
CORRECT
Set !
Settings
OK
No further procedure need be
carried out on the base station.
Stay close to the base station.
OK
OK
The registration code is indicated
on the label underneath the
base station (RC...).
41