Remote Access - Philips CD2353S/79 User Manual

EN
Answer machine remote access code
A three-digit answer machine security code is required for remote access.
The factory preset code is „000". You can change it to a unique code of your own.
Note : This remote access code is different from the base PIN which is used to register/un-register
handsets.
To change the remote access code (000 by default),
1. Press
2. Select ANS MACHINE and press OK.
3. Select CHANGE CODE and press OK.
4. Enter the current code and press OK.
5. Enter the new code and press OK.
6. Repeat the new code and press OK to confirm.

Remote access

You can access your answering machine when you are away from home by using a touch tone phone.
To remotely access the answering machine,
1. Place a call from an external line to your answering machine.
Note : If the answering machine is originally off, the answering machine will emit one beep after 10 rings.
Press
2. When the answering machine answers the call and starts playing the outgoing message, press
3. Enter the answer machine remote access code.
The code entered is correct : The remote access is activated once the correct answer machine
remote access code is entered.
The code entered is incorrect : You have three attempts to enter the correct answer machine
remote access code or the connection will be lost.
Note : If you are lost during remote access, press
again.
The connection will be lost if no key is pressed within 8 seconds from the last key pressed.
4. Press a key anytime to carry out the desired function.
34
Answering machine
on the handset.
, and then proceed to step 3.
5
twice to stop the current operation and start
.