System Setup
Usin
a temate
connections
You may need to use an alternate connection:
• If your TV does not have any audio output connections
or does not deliver the
audio to the Solo 15/10 system. See "Connecting
a cable/satellite
box to the sys-
tem" or "Connecting
a TV headphones output to the system" on pages 17-18.
If you do not get sound from a DVD player that is connected to your TV.
See "Connecting
multiple devices to the system" on page 19.
Connecting
a cable/satellite
box to the
system
You can connect a cable/satellite
box to the Solo 15/10 system. Only one cable is
needed.
Caution:
If using an optical cable, refer to page 12 for important
instructions.
1.
On the back of your cable/satellite
box, locate the Audio Out connector
panel
and note which type of audio outputs your cable/satellite
box has.
Remove caps
Audio OUT
Cable/satellite
box
Audio IN Solo 15/10 system
IIIIMIIIIIIIIIIIIIIIIIIIIII
2.
Choose the appropriate
audio cable for your cable/satellite
box.
3.
Connect the audio cable from your cable/satellite
box's Audio Out connector
panel to the Solo system.
English - 17