Bose Solo 15 Owner's Manual page 12

System Setup
Important instructions for optical cable connections
1. Remove the protective cap from both ends of the optical cable.
Bose logo
Remove caps
2. Hold the optical cable plug with the Bose logo facing up, as shown.
3. Align the plug with the Optical connector on the Solo system and insert the plug
carefully.
Note: The Optical connector on the Solo system has a hinged door that swings out
of the way when you insert the plug.
Hinged door
Caution: inserting the plug in the wrong orientation can damage the plug and/or
the connector.
4. Firmly push the plug into the connector until you hear or feel a click.
Test to be sure the plug cannot easily slip out of the connector.
12 - English