Neuro Pace ® Cortical Strip Lead; Neuro Pace ® Depth Lead - Neuropace RNS System User Manual

Table of Contents

Advertisement

Responsive Neurostimulator System
Lead Strain Relief (Model LSR-01)
The lead strain relief supports the proximal end(s) of the lead(s) at their exit from the neurostimulator
connector cover, protecting the lead from stress near the connector.
Magnet (Model M-01)
The magnet is a doughnut-shaped magnet which, when placed over the implanted RNS
Neurostimulator, suppresses therapy as long as the magnet is in position and, if the neurostimulator
is programmed to do so, triggers an electrocorticogram (ECoG) storage.
Torque Driver (Model TD-01)
The torque driver is used to tighten the screw that secures the connector cover to the neurostimulator
and to tighten the ferrule clamp that secures the neurostimulator to the ferrule.
®
N
P
C
EURO
ACE
ORTICAL
®
The NeuroPace
Cortical Strip Lead is intended for subdural implant to provide an interface through
which electrical activity of the brain can be monitored and electrical stimulation can be delivered.
Cortical Strip Leads
®
NeuroPace
Cortical Strip Leads are available in the following lengths:
15 centimeters (model CL-315-10)
25 centimeters (model CL-325-10)
35 centimeters (model CL-335-10)
There are four electrodes spaced 10 millimeters apart from each other. All four electrodes can be
configured for sensing, detection, and stimulation.
WARNING:
C
OMPATIBILITY WITH SIMILAR IMPLANTABLE PRODUCTS
The NeuroPace
NeuroPace
generators. Incompatible configurations may cause damage to the products and may
result in unsafe current densities delivered to the patient.
®
N
P
D
L
EURO
ACE
EPTH
EAD
®
The NeuroPace
Depth Lead is intended for implant into the brain to provide an interface through
which electrical activity of the brain can be monitored and electrical stimulation can be delivered.
Depth Leads
®
NeuroPace
Depth Leads are available in the following configurations:
30 centimeter length, 10 millimeter electrode spacing (model DL-330-10)
30 centimeter length, 3.5 millimeter electrode spacing (model DL-330-3.5)
44 centimeter length, 10 millimeter electrode spacing (model DL-344-10)
44 centimeter length, 3.5 millimeter electrode spacing (model DL-344-3.5)
All four electrodes can be configured for sensing, detection, and stimulation.
®
RNS
System User Manual
S
L
TRIP
EAD
®
®
RNS
Neurostimulator, NeuroPace
®
Depth Lead are not compatible with non-NeuroPace leads and / or pulse
®
®
Cortical Strip Lead, and
22

Advertisement

Table of Contents
loading

Table of Contents