EN
To set or change an SOS number
The SOS number feature allows you to enter 3 SOS phone numbers, which can be dialed
out although the call barring is activated. The maximum length of an SOS number is 4
digits. The PIN code is required when modify the SOS number.
1.
Press
2.
Press
3.
Press
4.
Press
.
5.
Enter the SOS number
To register a handset
Up to 5 handsets can be registered to the base station.
If you have inadvertently unregistered your handset, you can register it again. Additional
handsets must be registered to the base before use.
Warning : If you wish to register non Philips handsets to the CD 130 base station,
make sure that this handset is GAP compliant otherwise it will not operate properly
(see page 10).
To register a handset, first press the paging key
when the base is in idle mode. Then carry out the following steps on the handset within
one minute :
1.
Press
2.
Press
3.
Press
to confirm.
If the registration was successfull, a long confirmation tone is heard and the handset
number (1 to 5) will be assigned by the base automatically.
30
Advanced settings
and press Down
and press Down
and enter the PIN code
, scroll
to select the SOS number location 1, 2 or 3 and press
(max. 4 digits) and press
and press Down
and press Down
, enter the PIN code
to reach ADVANCE SET.
to reach SOS NUMBER.
(by default the PIN code is 0000).
on the base for approx. 5 seconds
to reach ADVANCE SET.
to reach REGISTRATION.
(by default the PIN code is 0000) and press
to confirm.