Table of Contents
Advertisement
EN
To change the dial mode*
The default value of dial mode that is preset in your CD 130 should be the best suited for
your country network and therefore you should not need to change it.
1.
Press
2.
Press
3.
Press
Local area code setting*
If your local PSTN sends the CID with local area code attached, it is necessary to filter out
the local area code when dial back from call log. The AREA CODE function allows you to
remove the local area code from the call log entries. The local area code can be set from
1 to 4 digits. The default setting is blank.
1.
Press
2.
Press
3.
Press
4.
Enter the new area code
press
To set or change Call Barring
This menu allows you to limit the use of your phone to specific calls by barring parts
(prefix) of outgoing numbers. You can set 4 different barring numbers.
1.
Press
2.
Press
3.
Press
4.
Press
28
Advanced settings
and press Down
and press Down
, scroll
to select TONE or PULSE and press
and press Down
and press Down
to view the current setting.
(the maximums for the area code is 4 digits) and
to save.
and press Down
and press Down
and enter the PIN code
, press Down
to reach BARR NUMBER and press
to reach ADVANCE SET.
to reach DIAL MODE.
to reach ADVANCE SET.
to reach AREA CODE.
to reach ADVANCE SET.
to reach CALL BARRING.
(by default the PIN code is 0000).
*Country dependent
to confirm.
*Country dependent
.
Advertisement
Table of Contents
