To Change The Dial Mode; Local Area Code Setting; To Set Or Change Call Barring - Philips VOX300 User Manual

To change the dial mode*

The default value of dial mode that is preset in your CD 135 should be the best suited for
your country network and therefore you should not need to change it.
1. Press and press Down
2. Press and press Down
3. Press , scroll

Local area code setting*

If your local PSTN sends the CID with local area code attached, it is necessary to filter out
the local area code when dial back from call log. The AREA CODE function allows you to
remove the local area code from the call log entries. The local area code can be set from
1 to 4 digits. The default setting is blank.
1. Press and press Down
2. Press and press Down
3. Press to view the current setting.
4. Enter the new area code
press to save.

To set or change Call Barring

This menu allows you to limit the use of your phone to specific calls by barring parts
(prefix) of outgoing numbers. You can set 4 different barring numbers.
1. Press and press Down
2. Press and press Down
3. Press and enter the PIN code
4. Press , press Down
Advanced settings
to reach ADVANCE SET.
to reach DIAL MODE.
to select TONE or PULSE and press
to reach ADVANCE SET.
to reach AREA CODE.
(the maximums for the area code is 4 digits) and
to reach ADVANCE SET.
to reach CALL BARRING.
to reach BARR NUMBER and press
*Country dependent
(by default the PIN code is 0000).
to confirm.
*Country dependent
.
29
EN